Five Forks mold removal

call (864) 301-4600 to schedule a virtual or in-person mold inspection

Your Home or Work Location in Five Forks, SC Will Be Cleaner Than it Has Ever Been Before

Our mold professionals are certified in mold inspections, air quality testing, surface mold testing, and mold remediation.

If your place is making you sick, or you are worried it might be? Our EPA & FDA approved mold disinfectants and Patented Dry-Fog create a healthy indoor environment safely and quickly.  We guarantee your location in Five Forks, SC will be healthier than it has ever been before.

If urgent, we can be at home or work location within 24 to 48 hours.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Five Forks Mold Remediation

Save Money By Disinfecting More Surfaces

Our back-pressured dry fog reaches 10X to 100X more surface area than other mold removal methods.  Your other options reach far less in less time, and therefore require more demolition. Your options include…

In short, dry fog saves you money because it requires less demolition, which equals less reconstruction, which in turn equals less labor and fewer materials. 

In some instances we are less than half the cost of your alternatives. 

How is this possible?  The answer is in the method.  our patented foggers, atomize our sterilant and antimicrobial into particles smaller in size than mold spores. To ensure these micron sized droplets make it into every nook and cranny, we apply back pressure. This literally pushes the disinfection power of our hospital-grade sterilant around corners and even behind walls if there is a path.  The secret is our dry fog does the physical work, not expensive physical labor.  

Scrubbing, misting, ozone, wet-fogging, DIY and ultraviolet  are less effective because their reach is limited. For example if ultra violet light doesn’t shine on a surface on the backside of an object where mold is growing, that mold will continue to thrive.

Your cost savings is found in the efficacy of delivery. The result is you pay less for a more effective solution and higher quality end result.  Disinfecting 10X to 1000X the surface area of competing methods, and treating more air volume too, in far less time, is how you save money.

Reduce Downtime

All things equal, whether your mold removal job is big or small, dry fog will reach more surface area in less time.  Mold Busters Greenville can achieve total mold abatement and preventive anti-microbial application for the entire volume of the air and all surface area of walls, ceilings, floors and interior furnishings of a 2500 square foot home in just four hours.

This means no downtime for commercial mold removal, and no downtime at home if the job is done while you are at work. 

Unrivaled Efficacy

We dry fog all surfaces twice. Once with an EPA approved hospital-grade sterilant, that kills all molds, mildews, viruses and bacteria. Then again with an FDA approved antimicrobial that remains on the surface and continues to protect against new mold for up to 90 days after we leave the property. 

We will treat 10X to 1000X the surface area by also disinfecting all carpets, HVAC trunks and lines, sofas and other furniture, kitchen cabinets, mattresses, any items in open drawers and closets, mattresses, and everything else. In addition to getting your mold issue resolved, you get so much more without paying more. You get a total home cleanse.

Efficacy means we kill and denature more mold than anybody else. 

Disinfection is a critical step in mold remediation. Many think the efficacy of a disinfectant itself is all that matters. While it is true that not all disinfectants are effective against all types of mold, what may be equally important is that whatever disinfectant you choose reach all surfaces where there is mold, and penetrate deep. For every surface you don’t reach that has mold, the efficacy of even the most effective sterilant is still 0% for that surface.   

The next most critical attribute is “dwell time.” Every job takes time to complete, and it is no different for disinfectants. The time it takes for a disinfectant to kill mold  once in contact with the mold is called “dwell time.”   If it doesn’t remain in contact for the required dwell time, it’s efficacy can drop dramatically.   With Mold Busters our dry fog remains in contact with surfaces for far more than the required dwell-time… up to 30 minutes or longer. 

We challenge clients to find anybody who can do as good a job.

Get Guaranteed 5-Star Results

An aroma from cooking can travel throughout a home quickly.  Black molds, and other toxic molds can travel just as quickly. If you want to be sure you resolve mold-related health issues, or prevent any possibility of future health issues, you need to treat all effected surfaces. 

We guarantee we do this better than anybody else, which is why we have a 100% satisfaction guarantee, and is why our process gets 5-stars from every customer. 

Air Quality Testing

Is Testing Necessary with Visible Mold?

A visual inspection from a certified mold inspector negates the need for an air quality test, it also help you determine if you still have any hidden moisture issues that need to be rectified before investing in mold remediation.  If there is any doubt about how to start mold removal for your home or place of work in Greenville, then start with a mold inspection from a certified technician from Mold Busters Greenville.

 

Testing is Required for Insurance Claims

If mold is visible, and your home insurance to pay for the mold removal and reconstruction, then mold tests and or air quality tests may be necessary to meet the evidence requirements from your insurance company. If you know you will be submitting a claim to your insurance, to save time, schedule a mold inspection with mold testing for your first appointment. 

Testing Helps with Confirming Health Symptoms

When you suspect that a chronic sinus infection, worsening asthma, location-based headaches, or other symptoms are caused by mold, then an air quality test is a must, to validate that you have levels of mold at your location that would be sufficient to cause health issues.

Five Forks Certified Mold Inspections

First Step - Find the Source of Moisture

All types of mold need moisture to grow.  24 hours of 60% or greater humidity is all that is needed for mold to take hold.  However if you know that you have had a roof leak, pipe leak or any other moisture issues, the greatest value in having a certified mold inspector visit is their ability to find moisture, and help you solve the issue that is creating the water necessary to create an environment in which mold can grow. 

If water is found, the source of that water must be stopped and fixed before any remediation can take place. 

Second Step : Estimate the Cost to Return Your Place Back to Normal

Mold Busters Greenville will always coach homeowners and business owners on how to remediate mold on their own in instances where the mold is extremely limited. When the job definitely requires professional mold removal, we will provide a full estimate after completing a certified mold inspection at your place in Five Forks. 

Is a Virtual Mold Inspection a Good Option?

Virtual inspections become an option for customers  that have visible mold and are confident they have addressed all leaks and water issues. 

With a video call we can see everything we need to determine what you are up against and can do the inspection within just a couple hours.  

Want to get an accurate estimate quickly, don’t need a mold test report for your insurance company, and know that the water issue has been resolved, then a virtual inspection is the most hassle free option for you.

Customer Reviews from Five Forks and Beyond

Additional HouseCall Pro Reviews

Alan P.
Sep 19, 2021
Read More
Benjamin was professional in every way. Punctual for the initial meeting and the remediation day. He was patient and thorough in the explanation. I highly recommend their team!
Vickie G.
Sep 14, 2021
Read More
From the very first telephone contact with Kirsten to the completion of mold treatment at our Spartanburg county residence by Benjamin, we are extremely satisfied with the professionalism, friendliness, knowledge, and service of Mold Busters USA South Carolina!
Michael P.
Aug 18, 2021
Read More
Benjamin does a great job! And he is a very nice person. He follows up with you and will re do the mold remediation in your house if it's necessary. I'm very happy with Mold Busters, because it is a trustworthy company.
Marilyn S.
Aug 2, 2021
Read More
Terry R.
May 31, 2021
Read More
Leah O.
May 14, 2021
Read More
Robin V.
May 4, 2021
Read More
Vanessa W.
Apr 7, 2021
Read More
Benjamin is a very nice representative of his company. His presentation was excellent and not rehearsed. Between the initial meeting and the wecommork date, any additional questions I had were answered throughly. This whole experience was great and I know. I have had the traditional mold removal and remediation. I saw some instant results today. Not only will use him again if needed, have also recommended to everyone I know.
Stacey R.
Mar 22, 2021
Read More
Benjamin was so great! He took his time, did not rush us. Made sure all of our questions and concerns were addressed. We had an appointment for the treatment in the same week as we had the consult/estimate. That was so great to alleviate the nervousness of having mold in our crawlspace!! Would recommend this company to anyone and everyone.
Latrinda B.
Feb 8, 2021
Read More
Don W.
Dec 24, 2020
Read More
Will B.
Dec 10, 2020
Read More
A+ service all the way around!
Ellen C.
Nov 10, 2020
Read More
Would highly recommend. Knowledgeable, professional and trustworthy.
Brian P.
Oct 5, 2020
Read More
Excellent service. Very knowledgeable.
Paul D.
Sep 23, 2020
Read More
Benjamin responded immediately, gave me options, and did exactly what he said he would. He was courteous, efficient, on-time, diligent, etc. He is a professional, did an important job for a reasonable price, and I would certainly use him again.
Yash P.
Jul 14, 2020
Read More
Previous
Next

We can be at your home or business within 24 to 48 hours

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

CALL  864-301-4600, FILL OUT A FORM OR CHAT WITH US TO SCHEDULE A MOLD INSPECTION